Pre-commissioning of the Firefly Smart products
Everything delivered pre-programmed
Are you going for Firefly Smart? Then you will be completely unburdened by our pre-commissioning. What does that mean? 85% of the entire process is taken care of by us in advance. This means that your complete lighting plan is pre-programmed and tested. Further on you can read all the steps we take for you.
The advantage for you as an installer is a lightning-fast installation by means of Plug-and-Play (PnP). You only have to connect the Firefly Smart products to your project location according to our installation plan. Because the products are wireless, you can connect them quickly. Even 2x faster than before. And because we have pre-programmed them, you are done 2x faster. So you install 4 times faster!
The steps of pre-commissioning explained
-
Account activation
We create an account for your customer, set up a permissions structure and assign administrators and end users.
-
Create spaces
Your customer’s building is virtually created on our Firefly Platform, including floors, departments and spaces.
-
Identify and link products
Each Firefly Smart product is provided with a unique device ID corresponding to the installation plan. Then the products such as switches, sensors and lighting are linked to the correct gateway.
-
Assign device
We zorgen dat de juiste Firefly Smart producten worden toegekend aan de juiste virtuele ruimtes op basis van het installatieplan.
-
Create groups
Once the lighting is virtually in the right space, we create groups. We do this so that your customer can easily choose to control multiple lights from one group, for example.
-
Creating scenes
We can create preset programs (scenes) for specific situations as desired. Does your client want to dim the light during a beamer presentation? Then we create a ‘presentation mode’. This scene can be activated with one push of a button.
-
Automation
After going through all the previous steps, we set up automations based on the customer’s wishes. For example, think of a sensor that detects presence, which turns on the lighting according to the right scene.
-
Testing
As a final step, we test everything and prepare everything for delivery.
-
Installation
You will receive your Firefly Smart products from us. Thanks to our pre-commissioning process, everything is prepared down to the last detail. At the project location, it is therefore only a matter of mounting via the installation plan: Plug-and-Play.
-
Fine-tuning
After installation, you can easily adjust the latest settings via the Firefly app if necessary.
Tijdens het kennismakingsgesprek luisteren wij naar je wensen en problemen over de huidige verlichting. We kijken samen hoe we jouw lichtplan efficiënter en slimmer kunnen maken.
Save time
With our unique working method, you as an installer save a lot of time on the project. You can deliver a project 4x faster on average.
- 2x faster due to our preparation (pre-commissioning).
- Another 2x faster due to the Plug-and-Play installation.
In short, 4x faster!
“For a fixed amount, without investment, completely unburdened! Now that's service”
FC Den Bosch
"Together we have found a better solution. More sustainable and without investment"
MTS Euro Products
"Firefly has brought the light from the outside inside"
Martijn - Innovatiemanager Careyn
